Industrial pressure transmitter - Model PF1V
Senzors’ model PF1V is a compact, rugged pressure transmitter with a sanitary flush diaphragm that utilizes the latest leading-edge technologies to measure pressure. With its excellent stability and proven reliability, the PF1V provides unequaled performance and is designed for any application that requires a high-pressure measurement.
The sensing element is a solid-state, piezoresistive MEMS silicon die. This technology provides excellent repeatability, increased long-term stability and reliability, and virtually no hysteresis. The silicon strain gage is fitted into a 316L stainless steel package and is completely isolated from the media.
The sensor signal is amplified by state-of-the-art ASIC-based electronics which provides a high-level output from an unregulated voltage supply and a fast response time with no latency, thanks to analog signal processing from end to end. The ASIC enhances accuracy while reducing the transmitter’s size. Coupled with MEMS technology, it also enables Senzors to offer almost any output over any pressure range. Each unit is fully tested, compensated and calibrated for pressure and temperature. Each transmitter is shipped with a traceable calibration card.
The electronic circuit is packaged in a hermetically-sealed, all-welded 316L stainless steel housing enabling the PF1V to be immersed in water or pressure washed without internal leakage (depends on termination). This design makes the PF1V ideal for pressure measurements that can involve wet, corrosive or sterile media in the most severe environments.
|Pressure range||0 to 200 bar through 0 to 600 bar|
|Pressure type||✔ absolute ✔ sealed gage ✔ compound|
|Vacuum||possible, down to 50 μbar absolute|
|Safe overpressure||1.5 x|
|Burst pressure||2 x|
|Storage temperature||-40 to 125°C|
|Operating temperature extremes||-40°C, 125°C|
|Maximum operating temperature span||160°C|
|Ambient temperature||-40 to 80°C|
|Electrical characteristics (choose one circuit)|
|Power supply / excitation||8 - 32 VDC||13 - 32 VDC||8 - 32 VDC||8 - 32 VDC|
|Output signal||4 - 20 mA||0 - 10 VDC||0 - 5 VDC||0.5 - 4.5 VDC|
|Current draw||20 mA||5 mA||5 mA||4 mA|
|Response time||5 ms||5 ms||5 ms||5 ms|
|Electrical connections||✔ DIN 43650-A ✔ Amphenol C 091 A ✔ M12x1 ✔ PTIH-10-6P ✔ PE cable|
|Mechanical connections||✔ G 1/2" Ext ✔ 1/2"-14NPT Ext|
|Materials available||316L Stainless steel|
|Seal materials available||FKM, EPDM, Silicone, NBR|
|Performance (depending on temperature compensation range)|
|Compensated temperature range||0 to 50°C||-10 to 80°C|
|Temperature drift of Zero||±0.01%FS/K||±0.01%FS/K|
|Temperature drift of Sensitivity||±0.03%/K||±0.03%/K|
|Stability (per annum)||±0.1%FS||±0.1%FS|
All values are typical values.