Bringing advanced technology to sensors

Industrial pressure transmitter - Model PKCL

Pressure transmitter PKCL

Product description

Equipped with a tri-clamp fitting, the PKCL is a compact, rugged pressure transmitter with a sanitary flush diaphragm that utilizes the latest leading-edge technologies to measure pressure. With its excellent stability and proven reliability, the PKCL provides unequaled performance and is designed for any application that requires a low pressure measurement.

The sensing element is a solid-state, piezoresistive MEMS silicon die. This technology provides excellent repeatability, increased long-term stability and reliability, and virtually no hysteresis. The silicon strain gage is fitted into a 316L stainless steel package and is completely isolated from the media.

The sensor signal is digitized, compensated and processed by a powerful, low power 32-bit microcontroller. It is then converted back to an amplified analog signal. The digital electronics ensures precise calibration of all critical parameters and achieves very high precision, thermal stability and compensation of all repeatable errors. Each unit is fully tested, compensated and calibrated for pressure and temperature. Each transmitter is shipped with a traceable calibration card.

The electronic circuit is packaged in a hermetically-sealed, all-welded 316L stainless steel housing enabling the PKCL to be immersed in water or pressure washed without internal leakage (depends on termination). This design makes the PKCL ideal for pressure measurements that can involve wet, corrosive or sterile media in the most severe environments.

Specifications

Physical characteristics
Pressure range 0 to 0.2 bar through 0 to 2 bar
Pressure type ✔ absolute ✔ vented gage ✔ sealed gage ✔ compound ✔ barometric
Vacuum possible, down to 1 μbar absolute
Safe overpressure 1.5 x
Burst pressure 2 x
Environmental characteristics
Storage temperature -40 to 125°C
Operating temperature extremes -40°C, 150°C
Maximum operating temperature span 160°C
Ambient temperature -40 to 120°C
Electrical characteristics (choose one circuit)
Power supply / excitation 8 - 32 VDC 13 - 32 VDC 8 - 32 VDC 8 - 32 VDC
Output signal 4 - 20 mA 0 - 10 VDC 0 - 5 VDC 0.5 - 4.5 VDC
Current draw 20 mA 5 mA 5 mA 4 mA
Response time 5 ms 5 ms 5 ms 5 ms
Mechanical characteristics
Electrical connections ✔ Amphenol C 091 A ✔ PTIH-10-6P ✔ PE cable
Mechanical connections ✔ 1/2" Tri-Clamp Ext ✔ 3/4" Tri-Clamp Ext ✔ 1" Tri-Clamp Ext ✔ 1 1/2" Tri-Clamp Ext
Materials available 316L Stainless steel
Seal materials available FKM, EPDM, Silicone, NBR
Performance (depending on temperature compensation range)
Compensated temperature range 0 to 50°C -10 to 80°C
Linearity ±0.04%FS ±0.04%FS
Hysteresis ±0.005%FS ±0.005%FS
Repeatability ±0.005%FS ±0.005%FS
Zero offset ±2mV ±2mV
Span offset ±0 ±0
Temperature drift of Zero ±0.01%FS/K ±0.01%FS/K
Temperature drift of Sensitivity ±0.03%/K ±0.03%/K
Stability (per annum) ±1mbar ±1mbar

All values are typical values.