Industrial pressure transmitter - Model PT2U
The PT2U model is a small, rugged and reliable pressure transmitter that utilizes the latest leading-edge technologies to measure very high pressures. Its small size (approx. 3/4” x 2”), light weight and slim profile allows for mounting in places too tight for most other transmitters. The PT2U is a durable and accurate pressure transmitter specifically designed for demanding applications where the primary criteria are reliability and low cost.
The sensing element is a solid-state, piezoresistive MEMS silicon die. This technology provides excellent repeatability, increased long-term stability and reliability, and virtually no hysteresis. The silicon strain gage is fitted into a 316L stainless steel package and is completely isolated from the media. There are no internal O-rings or elastomers to contain the media and to contribute to instabilities or drifts.
The solid-state strain gage sensor signal is amplified by state-of-the-art ASIC-based electronics which provides a high-level output from an unregulated voltage supply and a fast response time with no latency, thanks to analog signal processing from end to end. The ASIC enhances accuracy while reducing the transmitter’s size. Coupled with MEMS technology, it also enables Senzors to offer almost any output over any pressure range. Each unit is fully tested, compensated and calibrated for pressure and temperature. Each transmitter is shipped with a traceable calibration card.
Providing excellent media compatibility with all 316L stainless steel wetted parts, it is perfectly suited for applications where media compatibility is a problem. With its high stability, low cost and proven reliability in industrial as well as outdoor environments, it is ideal for OEM applications. A modular design allows special ordering of fittings, electrical connections, output signals, etc.
|Pressure range||0 to 600 bar through 0 to 1000 bar|
|Pressure type||✔ absolute ✔ sealed gage ✔ compound|
|Vacuum||possible, down to 300 mbar absolute|
|Safe overpressure||1.5 x|
|Burst pressure||2 x|
|Storage temperature||-40 to 100°C|
|Operating temperature extremes||-40°C, 100°C|
|Maximum operating temperature span||140°C|
|Ambient temperature||-40 to 80°C|
|Electrical characteristics (choose one circuit)|
|Power supply / excitation||8 - 32 VDC||13 - 32 VDC||8 - 32 VDC||8 - 32 VDC|
|Output signal||4 - 20 mA||0 - 10 VDC||0 - 5 VDC||0.5 - 4.5 VDC|
|Current draw||20 mA||5 mA||5 mA||4 mA|
|Response time||5 ms||5 ms||5 ms||5 ms|
|Electrical connections||✔ DIN 43650-C (Sub-micro) ✔ M12x1 ✔ Packard Metri-Pack ✔ PVC cable|
|Mechanical connections||✔ G 1/4" Ext ✔ G 1/8" Ext ✔ 1/4"-18NPT Ext ✔ 7/16"-20UNF Ext ✔ 7/16"-20UNF Int|
|Materials available||316L Stainless steel|
|Seal materials available||FKM, EPDM, Silicone, NBR|
|Performance (depending on temperature compensation range)|
|Compensated temperature range||0 to 50°C||-10 to 80°C|
|Temperature drift of Zero||±0.01%FS/K||±0.01%FS/K|
|Temperature drift of Sensitivity||±0.03%/K||±0.03%/K|
|Stability (per annum)||±0.2%FS||±0.2%FS|
All values are typical values.